WarwickSasco Disinfection Soaking Container, 426x156x138mm, 5 Liters, Per Unit by WarwickSASCo

Code: DSS4215

Dimensions: 426x156x138mm
Volume: 5 litres
Material: Polypropylene
Colour: Blue
Pack Size: 1

Intended Use

• Container specifically intended for the cleaning, and/or disinfection of devices.
• Container to hold and transport medical/surgical instruments for a procedure.
• Reusable product.

Intended User

Product to be used by clinical professionals and decontamination technicians.

Product Features

• Autoclavable.
• Strong and durable.
• Guaranteed 1000 cycles.
• Light weight – “about 50% lighter than stainless steel”.
• Improved removal of residues.
• Smooth edges and surfaces eliminate paper rips during sterilization.
• Designed to maximise space for instruments and accessories.

Product can be used in conjunction with

• Product sold as a kit comprising tank, lid, strainer, and tray
• Cleaning and Disinfection
• Separate components individually, avoiding contact with other items.
• Position products to allow water penetration and drainage.
• Machine clean in washer disinfectors compliant with ISO 15883.
• Use approved detergents, enzymatic or biocide cleaners, suitable for cleaning medical devices and surgical instruments which are compatible with polypropylene material (see detergent manufacturers’ guide).
• Use detergents and disinfectants with a range between 2pH and 13pH.
• Ultrasonic cleaning is permissible.
• Manual cleaning is permissible – separate product components and clean individually.
• Rinse with clean water.
• Dry with unwoven towels.
• Do not use abrasive materials.
• Inspection Maintenance and Incident Reporting
• Visually inspect product to identify damage.
• Discard damaged product.
• Any serious incident that has occurred during the use of this product should be reported to the manufacturer, and the Competent Authority of the territory in which the user is established.

Wrapping

• Sterilization wrapping sheets and pouches must be compatible with polypropylene material and suitable for the chosen method of sterilization.
• Be aware that some wrapping sheets and pouches shrink during sterilization.
• Pouches must be large enough to contain the product without stressing the seals.
• We advise using a pouch or bag that is 25% larger than the product.

Sterilization

• Moist Heat sterilization (Autoclave) at 134.6°C (+2°C) for a minimum of 2 minutes.
• EO Ethylene Oxide “Gas” sterilization at maximum temperature of 65°C.
• H2O2 Hydrogen Peroxide “Plasma” sterilization at maximum temperature of 65°C.
• Sterilization procedures and machines to comply with ISO 17655, ISO 25424, and ISO 11135.

Disposal

• End of life is determined by wear and tear, visual inspection, or damage to product.
• If product is contaminated treat as clinical waste, and dispose of in accordance with clinical waste procedures.

Warnings

• Do not use abrasive powders or metal brushes as they may cause surface damage.
• Do not exceed 137°C.
• Do not exceed 4 minutes.