Complies with the DGHM standard methods, EN 1040, EN 1275, EN 13624, EN 13727, EN 14348, EN 14476, EN 14561, EN 14562, EN 14563 and RKI/DVV guidelines. DGHM/VAH listed.
250 ml bottle
1 litre bottle
2 litre bottle
5 litre canister
OROLIN® Burbath Container 1 piece
OROCLEAN® Discharge Stopcock for 5 litre and 10 litre canisters, 1 piece
Fully virucidal within 60 seconds
Active against even the most resistant viruses such as poliovirus and adenovirus.
Highly effective even in the presence of blood and proteins
The solution can be used for up to 1 week.
Broad effective spectrum
Active against bacteria, mycobacteria, fungi as well as enveloped and non-enveloped viruses.
Contains corrosion inhibitors
The disinfectant contains highly effective corrosion inhibitors to guard against rusting.
You do not need to rinse rotary instruments after immersion disinfection.
Suitable for use in ultrasonic cleaning devices
The cleansing power of the disinfectant can be further increased using an ultrasonic cleaning device.
Available in various packaging sizes
Choose a size that best suits your requirements.
The solution is biodegradable and does not negatively impact the ecosystem.
Tested under high organic load
The disinfectant remains effective even in the presence of heavy organic contamination such as blood or other bodily fluids.
Suitable for orthodontic instruments
Complies with European standards
OROLIN® Burbath is a ready-to-use, aldehyde-free product for the disinfection and cleaning of all rotating dental and surgical instruments. OROLIN® Burbath has a very broad effective spectrum and is fast acting: Within only one minute, OROLIN®Burbath is bactericidal, tuberculocidal, mycobactericidal, yeasticidal, fungicidal, and virucidal. A combination of protein-dissolving agents and versatile tensides generates strong cleaning power. OROLIN® Burbath is easily biodegradable.
Scope of Application
Scope of Application
For the disinfection and cleaning of all rotating dental and surgical instruments such as bone cutters, countersink burs, carbide burs, grinders, finishing burs, drill cleaning brushes made of brass wire, pointed and polishing brushes, rubber polishing wheels
Pour ready-to-use solution into the OROLIN® Burbath container. Immerse burs and leave to act. Adhere to exposure times. Do not rinse burs with water after disinfection. Leave burs to dry. Replace solution twice or three times a week, depending on the degree of contamination. A daily change is recommended. The solution can be used for a maximum of 7 days. Not suitable for aluminium, copper, or alcohol-sensitive materials.
Frequently Asked Question
Physical and chemical properties
Physical state: Clear, non-viscous liquid
Colour: Colourless to slightly yellow
Scent: Of alcohol
pH-value: 13 - 14
Shelf Life: 36 months
Composition in 100 g
32 g isopropanol, 0.7 g phenoxyethanol, 0.2 g quaternary ammonium compounds, alkali, corrosion inhibitors, surfactants
H226 Flammable liquid and vapour. H290 May be corrosive to metals. H315 Causes skin irritation. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves, protective clothing and eye protection. P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P501 Dispose of contents/container in accordance with relevant regulations
Standard warranty covered by the seller against any manufacturing defect. In such events, please report to us within 7 days from the date of delivery at firstname.lastname@example.org.
Overall Customer Rating:
0 customer reviews
Sign In Or Register to post your reviews. Sign Up